Slashdot is powered by your submissions, so send in your scoop

 



Forgot your password?
typodupeerror
×
PlayStation (Games) Media Movies Television

Blame Gaming - Is the Blinking PS3 Sony's Fault? 103

mattnyc99 writes "After discovering a blinking problem associated with the HDCP handshake from an HDMI cable to the PlayStation 3, then solving it, Popular Mechanics has now set off a mini-war between Westinghouse and Sony. The 1080p TV set maker appears to be blaming Sony as the source of the blinking PS3, and the two powerhouse companies have organized a meeting to settle the score. From the article: '[Westinghouse had] one suggestion for PS3 owners with blinking Westinghouse televisions: Purchasing an HDMI to DVI adapter to bypass HDCP. Average cost of an adapter: $30. As we reported last week, Popular Mechanics has found an even easier solution: Unplugging the HDMI cable, and then plugging it back in'"
This discussion has been archived. No new comments can be posted.

Blame Gaming - Is the Blinking PS3 Sony's Fault?

Comments Filter:
  • by haddieman ( 1033476 ) on Thursday January 25, 2007 @11:21AM (#17752088)
    ...STARING CONTEST!!!!!
    • by splutty ( 43475 ) on Thursday January 25, 2007 @11:24AM (#17752146)
      Is obviously the best tool in this 'contest', without any doubt.
      • Is the most appropriate course to play in this contest.
      • by inKubus ( 199753 )
        I, for one, am a little pissed at the article title. This is a gratutitous use of the question mark. The article clearly states that the problem is the _television_. Why the FUCK would you make the article title, "Blame Gaming - Is the Blinking PS3 Sony's Fault?". This is INCORRECT. A correct title would be "Blinking PS3 HDMI Problem Caused by Television". What the fuck is this? Fox News? Jesus fucking christ. Go back to school asshole.

        For further reference, see this [youtube.com].
        • by Raenex ( 947668 )

          The article clearly states that the problem is the _television_.

          No, you're wrong. There are three articles listed in the summary, each written at a later time than the previous one. The second article pinned the blame on the TV, but the last one now has Westinghouse blaming Sony:

          "Contrary to their earlier statements, Westinghouse now claims that their 1080p televisions are not the cause of the Sony PlayStation 3 blinking phenomenon. The company had indicated earlier that a problem with the firmware

  • by MeanderingMind ( 884641 ) on Thursday January 25, 2007 @11:32AM (#17752290) Homepage Journal
    There's a lot of review in the first link and very little "blinking problem". Here's the relevant paragraph.

    Our console also had a few technological burps that we weren't sure could be attributed to the PS3 or our test equipment. For instance, on multiple occasions, the HDMI connection to our 1080p set (a stunning piece of equipment itself) caused the image to blink on and off repeatedly--a problem that was solved by simply unplugging and replugging the cable. Was this Sony's fault or Westinghouse's? We're not sure, but no other device has caused our equipment to blink like that. Hmmm.
    • by Anonymous Coward
      I really don't see who else's blinking problem it could be if not blinking Sony's! Sure, they've made it my blinking problem now but they designed the blinking console in the first place. Blinkwits.
    • Re: (Score:1, Informative)

      by Anonymous Coward
      How on earth can you call a westinghouse LCD panel "a stunning piece of equipment". They are entry level LCDs which tend to suffer with all sorts of silly connection issues requiring power off/on to fix, as well as visual banding problems, and a rather poor quality displaying of black.

      Check out AVS forum westinghouse owners' threads, and you'll see a fair number of people have problem with their panels, and quite often return them to buy something better.
    • If you can tell me whether or not I am going to give you a million dollars, I will give you a million dollars.

      You will not give me a million dollars.

      Did you mean "if and only if"?

  • by sqlrob ( 173498 ) on Thursday January 25, 2007 @11:33AM (#17752318)
    As well as Westinghouse's. Anyone that wants to implement the DRM without full testing (or hell, implement it, period) gets the blame.
    • Without full testing?

      There you go overspecifying again.
    • by MeanderingMind ( 884641 ) on Thursday January 25, 2007 @11:41AM (#17752440) Homepage Journal
      I'm giving it slightly more weight against Westinghouse than Sony. It seems odd to me that the PS3 would work perfectly fine with other HDTVs, and then be at fault for not working with one particular brand. It's possible that some small quirk of the PS3 is contributing, but given that we haven't seen reports of the PS3 failing with Samsungs, Toshibas etc. I highly doubt Westinghouse's claims about it being a problem with the "source".
      • by Mike Buddha ( 10734 ) on Thursday January 25, 2007 @12:22PM (#17753130)
        It seems odd to me that the PS3 would work perfectly fine with other HDTVs, and then be at fault for not working with one particular brand.

        Isn't it just as peculiar that the Westinghouse works just fine with other HDCP compliant devices without this issue? Your suspicions on this company are a symptom of Sony Fanboyism. There is a problem with these two companies products, they (not just Westinghouse) need to fix it.
        • Please refrain from the fanboyism card. Were it true, I'd be an Apple-Microsoft-Linux supporting hardcore Wii-Xbox-PS3 gamer voting Republican-Democratic-Independant.

          Having read the articles, Westinghouse initially blamed their own firmware before changing their story to blame the PS3. I also believe the articles imply that Westinghouse's TVs are somewhat slower than usual when handshaking the HDCP key. It's possible that the PS3 doesn't act forgivingly when the handshaking comes slowly. However, I don't th
          • Re: (Score:3, Interesting)

            by Mike Buddha ( 10734 )
            As the PS3 suffers under far greater scrutiny here, I would postulate any problems with Westinghouse TVs would go largely unnoticed.

            I don't for a second believe that the 200,000 PS3s in the world recieve more scrutiny than the Westinghouse LCDs. These TVs are quite popular amongst AV junkies because they are the most reasonably priced 1080p HDTVs available. If you think they aren't being agonized over by AV nerds, I'd suggest you take a look at AVSFORUM.COM. If I were in the tinfoil hat crew, I'd suggest th
      • by SQLGuru ( 980662 )
        Not having access to either a PS3 or a Westinghouse TV my questions would be:

        1. Does the PS3 work with all other devices that have implemented this feature?
        2. Does the Westinghouse TV work with all other devices that have implemented this feature?
        3. Is there an issue with the connection (as in - are the cables good or to blame)?

        I don't care either way. It doesn't impact me (and likely won't in the future)....unless the problem pops up with other HDMI interfaced devices.

        Layne
      • Re: (Score:2, Insightful)

        by Endo13 ( 1000782 )

        It seems odd to me that the PS3 would work perfectly fine with other HDTVs, and then be at fault for not working with one particular brand.

        If you read the comments on all three articles, you'll see that it's not just happening with Westinghouse TVs. Even more interesting, it's also not just happening with PS3s - it happens with Sony's standalone Blu-Ray players as well.

        Here's a couple of the comments.

        This is not JUST Westinghouse televisions happens on others as well check out this http://www.avsforum.com/avs-vb/showthread.php?t=75 2327 [avsforum.com] the issue is in the Sony HDMI connector

        ----------------

        Your investigation is quite on target. However, this isn't just happening on the PS3, it's also doing it on the Blu Ray BDP-S1 stand alone player that Sony released recently that's available at Best Buy. We do the same thing to get it to work and this is with a Sharp Aquos 52" LC-52D62U LCD 1080P. It does it about everyday at random. We either unplug the cable or turn off and on the Blu Ray player to make it go away. I also have the newest HD DVD player HD-A2 released by Toshiba with HDMI and it doesn't suffer from this problem. I'm pretty sure it's a Sony issue.

        • I usually skip the comments, thanks for pointing that out. It will be interesting to see where this goes.

          If it's true that Sony shares a large part of the blame, they'll want to fix it quickly and quietly.
          • by Endo13 ( 1000782 )

            It will be interesting to see where this goes.
            Yes it will. I would say this was the last thing Sony needed right now, on top of everything else that's gone wrong for them in the last year. Hopefully they'll find some way to recover.
    • No comment on whether they did the job right, they might suck at it and this could all be their fault, I'm just saying that as a practical matter they have to support the inputs that devices people will want to hook up will output. Anyone with a PS3 obviously isn't turned off by DRM on principle, and it would be foolish of Westinghouse not to support HDCP. They don't only support HDCP, they support multiple inputs, again for practical reasons. They don't seem to really care about DRM, either, other than
      • It's my understanding that this solution would only work for now. The HDCP-Required flag (which tells devices to downsample if the HDCP chain is broken) is not set on any video sources as of yet. They will start setting it in a few more years when setting it won't destroy their market penetration. At that time, many people will start seeing new games and new movies in a downsampled resolution, but correcting it then will be a matter of completing the HDCP chain (probably by plugging a HDMI cable directly
  • by thatguywhoiam ( 524290 ) on Thursday January 25, 2007 @11:39AM (#17752398)
    Its just a matter of the handshake for HDCP not waiting long enough. The PS3 expects a reply to the handshake within a certain amount of time, and some older sets or ones that cut corners (Westinghouse - why did you think it was so cheap?) take an awfully long time to say 'yes, hi, here's the signal'.

    So - not Sony's fault. However, I don't see why Sony couldn't easily tell the PS3 to wait a bit longer for the handshake, which is probably what will happen.

    Also - there's typically no need to re-plug the HDMI cable if you happen to have this blinking phenomenon happening to you; just cycle the video Sources on yout TV. That should force it to re-negotiate. (My TV doesn't do this but a friend's does.)

    • Honestly, I almost think Sony shouldn't increase the PS3's handshake time. It would certainly fix the issue, but at the same time it might give Westinghouse and those who would see Sony perish in flames fuel for the fire.

      It's be much better if first they could get a concession from Westinghouse that its HDCP response was beyond normal tolerance levels and outside the reasonable wait time an HDMI compliant device should expect. Then they could clearly say, "The PS3 was fine, but we're fixing this so that our

    • Its just a matter of the handshake for HDCP not waiting long enough. The PS3 expects a reply to the handshake within a certain amount of time

      And within the HDCP documentation is their a timeout value specified when the sending unit should give up? If so, is Sony giving up before the specified timeout?

      If there's no timeout value specified, I'd say it's the designers of the specification that are to blame. This kind of problem crops up all the time. There's some critical spec that isn't specified, and one
    • by Speare ( 84249 )

      Conversely, I would say it IS Sony's fault. Maybe not the PS3 team's fault directly, but as a major commercial content label, Sony Corporation was clearly a part of the definition of HDMI in the first place. This is just reaping what they sow: they can't make products that consistently grant users valid access when they make technological barriers against what they see as "invalid" access.

  • by Thraxen ( 455388 ) on Thursday January 25, 2007 @11:40AM (#17752420)
    It seems odd that this issue would only appear on Westinghouse displays if the problem was with the PS3. I own a PS3 and have it connected to a Samsung TV via HDMI and have never seen this issue.
    • It seems odd that this issue would only appear on a Sony PS2 if the problem was with the TV. I own a Westinghouse TV and have it connected to a HD-DVD player via HDMI and have never seen this issue.

      Do you see?
      • Yes, but if the PS3s were the problem, we'd be hearing about it from more than just Westinghouse owners.

        At BEST its something in the combination of the two (Westinghouse not being quick enough on the reply and Sony not allowing any leeway in waiting for the reply).
        • by jafuser ( 112236 ) on Thursday January 25, 2007 @01:23PM (#17754272)
          Yes, but if the PS3s were the problem, we'd be hearing about it from more than just Westinghouse owners.

          From phantomhitman on AVS Forums thread http://www.avsforum.com/avs-vb/showthread.php?t=75 2327 [avsforum.com] :

          I am now worried to death that my tv will have issues with the PS3. Even though Sony demo'ed the PS3 with the tv that I have, it still means nothing to me until real people post up real info. If you have your PS3 hooked up via HDMI please post your results here. I am looking for a Sony xbr2 (46 inch version if that matters at all) that has tried this. Thanks for any info guys and gals.

          Sony
          xbr2 60 inches-Displays image fine when it is available but losses image randomly. Blackouts happen and then the image reappears.
          xbr2 46 inch-No issues at all, syncs right up.
          xbr1 50 inch-only displays at 720p (this could be because this set doesnt support 1080p, more research neeed)
          xrd 60 and 50 inches-Randomly loses signal like the 60" Sony xbr2

          Samsung
          BD-P1000-steady flickering image
          other display "sparkly" noise images with 1080p resolution but seems fine with 720p.
          4696D-reports no signal found via hdmi sometimes and other times it works great.
          HL-S5087W-no issues with hmdi

          Panasonic
          TH42PX500-Randomly loses signal like the 60" Sony xbr2

          Westinghouse
          LVM-47w1-Randomly loses signal like the 60" Sony xbr2
          42w2-flashing screen and signal loss but works fine via hmdi-dvi
          37w3-flashing screen and no signal, turn off the tv and turn it back on and it seems to work.

          JVC
          JVC HD-61FN97-seems to work fine with everything except 480p via hdmi
      • Is any of the content you're playing through the HD-DVD Player HDCP protected? My understanding is that HDCP use is still optional and the content being played determines if it's enabled (but i may be wrong on that). If the HDCP handshake is what's causing the flickering, and none of your HD-DVD's are forcing the DVD player to use HDCP, it the issue wouldn't show up with the device.
      • by Thraxen ( 455388 )
        Indeed. Good point.
    • Re: (Score:3, Informative)

      by holt ( 86624 )
      It doesn't just appear on Westinghouse TVs. See this discussion on AVS Forum [avsforum.com]. Even Sony TVs are having issues with the PS3...
  • by GweeDo ( 127172 ) on Thursday January 25, 2007 @11:40AM (#17752424) Homepage
    As Popular Mechanic already pointed out this is the TV's fault. Westinghouse isn't responding the the HDCP handshake fast enough (as defined by the HDCP spec). If you call Westinghouse they will even send out a tech to update your firmware to fix it.

    Before you get that tech out to fix it, the DVI convert will work well, or Component cables, or the hack-o-the-week of unplug the HDMI cable.
    • by ivan256 ( 17499 )
      Before you get that tech out to fix it, the DVI convert will work well

      Won't you then be hosed when you want to use the system to watch movies that require an HDCP interconnect?

      Really what we need is for the FCC to ban HDCP in the interests of interoperability.
    • by Zebra_X ( 13249 )
      Maybe,

      What we don't know if the handshake time is part of the spec for HDMI/DVI. It is possible that Westinghouse is within the specified handshake period, and that the PS3 is not waiting long enough because in their testing with their Sony sets, everything worked fine ^ ^. Of course it is also possible that Westinghouse is out of spec. It's also possible that there is no spec at all for that particular aspect of the protocol.

      OWEL
    • by payndz ( 589033 )
      If you call Westinghouse they will even send out a tech to update your firmware to fix it.

      Now even TV sets not only have, but need firmware updates? Jesus tap-dancing Christ...
    • by Raenex ( 947668 )

      As Popular Mechanic already pointed out this is the TV's fault.

      It's not clear whose fault it is. Read the third article linked to from the summary, which is the real article prompting the story. The other two articles are older and provided for context.

      In typical Slashdot fashion, the summary did not make it clear which article was the article, but the summary did state that Westinghouse is now denying responsibility: "The 1080p TV set maker appears to be blaming Sony as the source of the blinking P

  • by Anonymous Coward
    Westinghouse has already said in previous statements that there is a firmware upgrade for their televisions that fixes this problem.

    I'm all for bashing Sony, but, if the TV has an upgrade that eliminates this problem, why is this Sony's fault?
  • by nweaver ( 113078 ) on Thursday January 25, 2007 @11:41AM (#17752438) Homepage
    Why they didn't just have HDMI's "copy protection" be ROT13?

    It wouldn't be any less secure than the stupid crypto they used, would still make sure the DMCA anti-circumvention provisions are in force, and would be less likely to be F@#)$(*ed up.

    (This post has been double-encrypted with ROT13. Reading this post without authorization will violate the DMCA anti-circumvention protections)
    • by Palshife ( 60519 )
      (This post has been double-encrypted with ROT13. Reading this post without authorization will violate the DMCA anti-circumvention protections)

      Holy shit! You cracked ROT26!
  • by yagu ( 721525 ) * <yayagu@[ ]il.com ['gma' in gap]> on Thursday January 25, 2007 @11:51AM (#17752568) Journal

    Here's where the providers of "stuff" for "us" have gone astray... They're arguing the wrong argument. None of us give a flying f*** whose fault the blinky is... we're freaking customers! And instead of apologies and fixes with humble apologies to the customers, these people don't have enough fingers on their hands to point blame on someone else.

    Message to providers of stuff: Provide us with good products, easy to use, and at reasonable cost and price. If something is wrong with the product, fix it.

    • by elrous0 ( 869638 ) *
      Reminds me of the old tire pressure debate. Auto-makers recommend tire pressures that improve the car's ride. Tire-makers, conversely, recommend tire pressures that improve the life of the tire. They are constantly bickering over this and many other issues [wikipedia.org]. It's in both their financial and legal best interests to blame one another rather than concentrate on the consumer and his interests.

      -Eric

    • I'll be HE could figure out how to fix it without having to unplug/plug every time!

      -Eric

    • I know pro-consumer rants are popular around here, but how the fuck are they supposed to fix the problem when it's not clear what's causing it?
  • by displague ( 4438 ) <slashdot@@@displague...com> on Thursday January 25, 2007 @11:52AM (#17752588) Homepage Journal
    I knew about the HDMI->DVI solution a while ago as I started off without an HDMI->HDMI cable. After installing the 1.50 firmware released last night my PS3 menu would not appear. I got a black screen (but the TV detected signal). When I managed my way blindly through the menu to start a game the game appeared fine. But when I quit back to the menu I was once again welcomed by a black screen.

    I called Sony support. They had me power off (I forgot about that switch in the back) and connect the composite cables (yuck) then reselect HDMI from the menu. This worked.

    I didn't want to get into the blinking issue with him, but when I told them that I worked around it with an HDMI->DVI cable the rep expressed surprise that it didn't break my TV and told me that Sony does not support this method.

    The Popular Mechanics article mentioned that some VIP at Westinghouse said technicians would be sent out to repair all of the affected TVs. When I called Westinghouse (prior to contacting Sony), they said that they haven't figured out the logistics of the sending technicians all around the world to upgrade the firmware. They told me to call back in a few weeks.

    After purchasing my first HDMI->DVI cable from RadioShak for $50, I picked up all my other HDMI and DVI cables from mycablemart.com for under $10. They work excellently. You'll have a hard time finding a better price.
    • You can get them even cheaper online at www.monoprice.com - extremely good cables (I have several HDMI, DVI, DVI->HDMI adapters, fiber optical, etc.) and you can get long 25 feet ones for $30. :)
    • If your monitor supports HDCP over DVI then an HDMI to DVI cable works just fine, since the video protocol is identical (or close enough).

      I think on the Westinghouse monitors in question they don't support HDCP on the DVI port only the HDMI port, that's why it doesn't work as a solution.

      Of course it's silly of Sony to run HDCP full time. It should only be run when the content provider explicitly asks for it.

      • by displague ( 4438 )
        I have played a blue-ray video (Talledega Nights) over DVI, so I assume either my Westinghouse supports it, the PS3 ignores it, or the video itself doesn't care.
  • Acronym hell? (Score:2, Interesting)

    by DogDude ( 805747 )
    I don't know what "HDMI to DVI adapter to bypass HDCP" means, and quite honestly, I don't care. But my question is, do manufacturers expect consumers to be able to understand all of this mess? What ever happened to plugging a game system into a TV? How many adapters and acronyms are people going to tolerate just to plug the damned thing to the TV? Sounds ridiculous to me. I'm a big fan of plain ol' RCA jacks: Red and white for audio, yellow for video. It's simple, and you can't screw it up. Just beca
    • by OiBoy ( 22100 )
      In theory, HDMA makes this even easier than your three little RCA jacks. One plug does everything. It really couldn't be any more simple. Unfortunately, some people cut corners and managed to screw it up.
      • In theory, HDMA makes this even easier than your three little RCA jacks. One plug does everything.

        I wouldn't want it do everything, though. The speakers built into my TV set are pretty lousy; I'd rather put the audio through my 5.1 surround receiver. With discrete audio and video connections, it's easy to set this up: the component video cables go from my DVD player to the TV, and the TOSlink optical audio cable goes from my DVD player to the receiver.

        I don't know how I'd even do that with HDMI connection
        • Looks like my original reply to your post got lost in the aether so here we go again. Most good HDMI supporting television's I've seen include digital optical outputs intended for use with your home theater system. The ones I've worked with before will switch the output depending on which HDMI input you're using so there's no worries about switching both the reciever input and television input when you want to change devices.

          Optionally you could get yourself a receiver that does HDMI switching or possibly a
    • by jafuser ( 112236 )
      I'm a big fan of plain ol' RCA jacks: Red and white for audio, yellow for video.

      Of course you're referring to composite signals there. Simply adding two more RCA cables will get you a *much* better component signal.

      Check out the wikipedia articles on composite video [wikipedia.org] and component video [wikipedia.org].

      I never noticed all of the noise in composite signals until I got a nice TV display. The noise isn't interference, it's due to the frequency-division multiplexing that composite video uses to send three signals down one wire
      • by jafuser ( 112236 )
        Oops, my second link should have been to http://en.wikipedia.org/wiki/Component_video [wikipedia.org]
      • by nuzak ( 959558 )
        Speaking of bright red... not sure if you know, but any other video geeks can always chime in: with two different TV's (one tube, and one LCD) and two different DVD players (different manufacturers), I've noticed that highly saturated reds always look more pixellated at the edges than any other color. Is this some weird compression artifact, or is some kind of visual perception thing? Or is it just me?

    • by be-fan ( 61476 )
      But my question is, do manufacturers expect consumers to be able to understand all of this mess? What ever happened to plugging a game system into a TV?

      When was this ever true? Even the original NES had people dealing with RF-output versus composite, and back then customers also had to deal with TVs that took mono-in, and figuring out that you could just connect the RCA jack for one stereo channel and it would work.
    • There plenty of answers to"why do I need so many different connections"

      The quickest answer I can think of is legacy. Many people have VCRs (for example) which are most likely coax and/or RCA. That is because when the technology was developed, that was the best that was the cheapest. Since people don't want to replace a VCR or any other piece of hardware when they buy a new TV, the TV manufacturer will provide those ports.

      The next answer is that the technology has gotten better. Since this is the case, there
    • by hal2814 ( 725639 )
      Ironic that you mention RCA jacks because my recently-replaced TV didn't have them. It had a coaxial input only. I had to get a $20 box to run the RCA cables through so it can get to my TV via coaxial. And before anyone goes defending coaxial as the best possible method, my TV before that had two screw terminals that I had to buy an adaptor for to plug in my NES. I was super steamed when I had to wait until the day after my birthday (nowhere to get such an adaptor on a Sunday back then in my town) to pl
    • Re: (Score:3, Insightful)

      by Manmademan ( 952354 )

      Just because the new sets and devices (like the PS3) are higher definition doesn't mean that plugging the damn things in should be so complicated. Why do I need 6 ways to connect a TV to a signal (coax cable, RCA plugs, S-video, HDMI, DVI, optical, etc.)? It makes me realize that I'm happy with my regular tube TV. It's cheap, it's simple, it looks good, and you don't have to go through 12 pages of directions to plug it in.

      Owners of black and white TV's thought their sets "looked good" too until they saw o

      • by gauauu ( 649169 )
        The nice thing about Coax was that you could chain things. You didn't have to have switches or 37 different jacks to plug your 37 things into. You just chained the antenna, atari, nintendo, vcr, etc all together, and it would work.

        I miss those days.

    • by HTH NE1 ( 675604 )
      Why do I need 6 ways to connect a TV to a signal (coax cable, RCA plugs, S-video, HDMI, DVI, optical, etc.)?

      Actually, I count twelve video sources, but some might consider them reaching or would combine some of them: NTSC via VHF tuner (rabbit ears), NTSC via UHF tuner (loop antenna), NTSC over RF coax (carries VHF and UHF), ATSC tuner (UHF), RF coax to CableCard, Composite, S-Video, Component, VGA, DVI, HDMI, or Firewire/i.Link/IEEE 1384.

      And that's the standards in the US. There's PAL and SCART to consid
  • "The 1080p TV set maker appears to be blaming Sony as the source of the blinking PS3, and the two powerhouse companies have organized a meeting to settle the score."

    So, are we talking a death match here or will it be paper rock scissors to settle this?
    • Re: (Score:3, Funny)

      by elrous0 ( 869638 ) *
      It will be the greatest sissy-slapfight since Sesame Street rumbled with The Electric Company.

      -Eric

    • by yermej ( 985079 )
      are we talking a death match here or will it be paper rock scissors to settle this?

      Or? You must not be playing rock, paper, scissors correctly.
  • Neither (Score:4, Insightful)

    by Criffer ( 842645 ) on Thursday January 25, 2007 @12:33PM (#17753330)
    The problem is neither Sony, nor Westinghouse. It's Intel.

    The problem is due to the Digital Compatibility Prevention (HDCP) [wikipedia.org]. The protocol is designed to prevent devices working together unless each manufacturer pays royalties to Digital Content Protection LLC, a subsiduary of Intel. The connection used is HDMI, whose specification mandates the use of Digital Compatibility Prevention, which is a shame, because otherwise it would be a nice connector.

    Until there is a digital connection standard which does not require that end-users be treated like criminals for having expensive displays, I will not be buying an HDTV, nor a PS3, and I urge others to do the same.

    I'm betting on delivering video over gigabit ethernet winning, because it's cheap, cat 6 cables are dirt cheap, and it doesn't require royalties. I would suggest HD-SDI (co-ax is even cheaper than UTP), but the licence agreement prevents it being used in "consumer" applications.
    • Until there is a digital connection standard which does not require that end-users be treated like criminals for having expensive displays, I will not be buying an HDTV

      DVI + S/PDIF FTW!

      I believe Sony does get some royalties for the the digital audio standard, but they don't mandate any form of copy prevention on it though.
      • by Criffer ( 842645 )
        Except that the HD ready [wikipedia.org] standard also requires HDCP over DVI. A standard which disallowed Digital Compatibility Prevention would be good, but unfortunately, Sony are unlikely to go for it.
      • by Criffer ( 842645 )
        And another thing: Any device which supports HDMI output must also, by way of the HDCP implementation licence (paid to Intel), restrict the quality on all digital outputs. That means, if there is a DVI output which doesn't have HDCP, it must be downscaled to 480p. The S/PDIF output must be downsampled to 16bit @ 48kHz (not that you'll hear any difference).

        So if you have an expensive TV, you don't get High Definition unless you pay Intel to use their Digital Compatibility Prevention.
  • by SuperKendall ( 25149 ) on Thursday January 25, 2007 @12:33PM (#17753340)
    All an HDMI to DVI adaptor does is take the video signal alone, without the audio channels, and feed it through the DVI side. If the video is HDCP encrypted, it will be encrypted on the DVI side as well as the adaptor is just passing the signal through - with the same results if the problem is the handshake speed as described.

    The problem is the HDCP encryption, not the cable itself. The way to think of HDMI is a cable that bundles together DVI video and PCM audio all in one cable (that's not quite correct, but a good way to think about it).

  • by Zantetsuken ( 935350 ) on Thursday January 25, 2007 @12:44PM (#17753568) Homepage
    The summary stated that Westinghouse said "Oh, just use an HDMI to DVI cable" - except that would defeat half the point of trying to use HDMI in the first place - the handshake is to let the DRM know that it's ok to send the 1080p signal because there isn't a recording device in between the PS3 and TV set (for pirating media such as movies)...

    The other half of using HDMI is for the audio and video to be on one cable. It's actually rather funny, because my brother-in-law still thinks that HDMI is just for putting the a/v on one cable, and that there's no DRM involved...
    • Actually, it's worse than that. HDCP runs over DVI just fine. After all, HDMI is just DVI + Audio. Using an HDMI->DVI cable does absolutely nothing to bypass the real problem, the friggin' HDCP protocol.
      • by tlhIngan ( 30335 )

        Actually, it's worse than that. HDCP runs over DVI just fine. After all, HDMI is just DVI + Audio. Using an HDMI->DVI cable does absolutely nothing to bypass the real problem, the friggin' HDCP protocol.

        I suspect that the Westinghouse TVs don't support HDCP over their DVI ports. My TV (Sharp Aquos LC37D90U) supports HDCP on the two HDMI ports *and* the DVI-I port (digital side only, of course, since DVI-I supports both analog and digital). Heck, many newer PC monitors support HDCP over DVI. I'm willing o

  • While I appreciate the pun in saying Westinghouse is a powerhouse company, it should be noted that in the present situation, they're actually a very small company. Westinghouse (the giant company) sell its trademarked name for other companies to use. So the TV maker Westinghouse's only relationship to Westinghouse Electric Company is the logo.
  • Did Sony back HDMI and HDCP? If so, then damn right they are to blame. Blaming a TV manufacturer for incorrectly implementing a standard that doesn't serve any useful purpose seems to ignore the real problem here.
    • by Ilgaz ( 86384 )

      Did Sony back HDMI and HDCP? If so, then damn right they are to blame. Blaming a TV manufacturer for incorrectly implementing a standard that doesn't serve any useful purpose seems to ignore the real problem here.

      While they brag like "HD Ready" on stickers/adverts, they are claiming full HDMI/HDCP support, e.g. "you will have no problems with HD devices outputting HDCP content over HDMI".

      If it is _only_ happening on Westinghouse, that TV is problematic and they should change them. What happens if same person buys a $200 Blu-Ray, HD-DVD (will happen) in future?

      In fact, the "HD Displays" generally have service upgradable firmwares, I guess this is the exact reason why.

  • Blame the MPAA! Sony and Westinghouse might be complying with this HDCP crap, and an Intel subsidiary might be making royalty money off it, but these companies wouldn't care a bit if the movie industry didn't bully content protection on all of us.
    • by jZnat ( 793348 ) *
      Sony is part of the MPAA (they produce movies, ever noticed?). So, let's go back to blaming Sony.

He has not acquired a fortune; the fortune has acquired him. -- Bion

Working...